IP agent
The IP agent manages the process of configuring a virtual IP address and its
subnet mask on an interface for IPv4 addresses. The virtual IP address must not
be in use. You can use this agent when you want to monitor a single IP address
on a single adapter.
Agent functions
Online
Solaris: Configures the IP address to the NIC. Checks if anothersystem is using the IP address. Uses the ifconfig command to set the IP
address on a unique alias on the interface
Offline
Brings down the IP address that is specified in the Address attribute.Monitor
Monitors the interface to test if the IP address that is associated with theinterface is alive.
Clean
Brings down the IP address that is associated with the specified interface.State definitions
ONLINE
Indicates that the device is up and the specified IP address is assigned tothe device.
OFFLINE
Indicates that the device is down or the specified IP address is not assignedto the device.
UNKNOWN
Indicates that the agent could not determine the state of the resource orthat the resource attributes are invalid.
Required attributes for Solaris
Address
A virtual IP address that is associated with the interface. Note thatthe address you specify must not be the same as the configured
physical IP address, but should be on the same network.
Device
The name of the NIC device that is associated with the IP address.Requires the device name without an alias.
Dependencies
IP resources depend on NIC resources.
main.cf
IP IP_test (
Critical = 0
Device = bge0
Address = "10.165.217.22"
NetMask = "255.255.255.0"
Options = trailers
)
CMD
hares -add IP_test IP TestGrouplab1
hares -modify IP_test Critical 0
hares -modify IP_test ArpDelay 1
hares -modify IP_test IfconfigTwice 0
hares -modify IP_test Device bge0
hares -modify IP_test Address 10.165.217.22
hares -modify IP_test NetMask 255.255.255.0
hares -modify IP_test Options trailers
hares -modify IP_test ContainerName
hares -modify IP_test Enabled 1
#####################################END OF IP AGENT#########################
NIC agent
The NIC agent monitors the configured NIC. If a network link fails, or if a
problem arises with the NIC, the resource is marked FAULTED. You can use the
agent to make a single IP address on a single adapter highly available or to
monitor it. This resource’s Operation value is OnOnly.
Dependencies
The NIC listed in the Device attribute must have an administrative IP address.
The administrative IP address is the default IP address that is assigned to the
physical interface of a host on a network
Agent functions
Monitor
Tests the network card and network link. Pings the network hosts or
broadcast address of the interface to generate traffic on the network.
Counts the number of packets passing through the device before and
after the address is pinged. If the count decreases or remains the
same, the resource is marked FAULTED.
If the NetworkHosts list is empty, or the ping test fails, the agent
sends a ping to the device’s broadcast address to generate network
traffic. The agent checks for any response to the broadcast request. If
there is no reply to the broadcast ping, the resource faults.
State definitions
ONLINE
Indicates that the NIC resource is working.OFFLINE
FAULTED
Indicates that the NIC has failed.UNKNOWN
Indicates the agent cannot determine the interface state. It may be due to
an incorrect configuration.
Required attributes for Solaris
Device
Name of the NIC that you want to monitor.cmd
hares -add NIC_AGENT_test NIC TestGrouplab1
hares -modify NIC_AGENT_test Critical 0
hares -modify NIC_AGENT_test PingOptimize 1
hares -modify NIC_AGENT_test Device bge0
hares -modify NIC_AGENT_test NetworkType
hares -modify NIC_AGENT_test NetworkHosts -delete -keys
hares -modify NIC_AGENT_test Enabled 0
main.cf
NIC NIC_AGENT_test (
Enabled = 0
Critical = 0
Device = bge0
)
###################################END OF NIC AGENT ############################
REFERENCE -VCS guide